*Please contact us for 3 axis Prokits or travel lengths not shown on our site.

PROKIT DRO Systems are designed to be a complete and easy solution for a broad variety of machine tool applications. Each PROKIT includes an Advanced Digital Readout as well as the precision scales with armored plug-n-play cable assemblies, plus a DRO arm and a bracketry kit specifically designed for the Machine Type and axes travels. For added simplicity, most PROKIT Systems can be packaged together within a single box.

Prokit Includes:

• 20i M LED readout or 40i TFT color readout
• (Resolution: 0.0002″ / 0.0005″ / 0.001″)
• Two precision scales with roller bearings & armored cables
• Mounting Hardware
• Installation Instructions

3 Year No Fault Warranty 

*Please contact us for 3 axis Prokits or travel lengths not shown on our site.

PROKIT DRO Systems are designed to be a complete and easy solution for a broad variety of machine tool applications. Each PROKIT includes an Advanced Digital Readout as well as the precision scales with armored plug-n-play cable assemblies, plus a DRO arm and a bracketry kit specifically designed for the Machine Type and axes travels. For added simplicity, most PROKIT Systems can be packaged together within a single box.

Prokit Includes:

• 20i T LED readout or 40i TFT color readout
• (Resolution: 0.0002″ / 0.0005″ / 0.001″)
• Two precision scales with roller bearings & armored cables
• Mounting Hardware
• Installation Instructions

3 Year No Fault Warranty 

The DP1200 was designed specifically for long travel machine tools. It includes features that are essential for increasing productivity on boring mills, VTLs, milling machines and long travel lathes. Built with the operator in mind, the DP1200 includes large, clear numerical displays and an intuitive color TFT message screen along with an optional DSU.

• Available in 2, 3 or 4 axes (including rotary/angular)
• Clean, Crisp, Extra Large, LEDs
• 3.5" TFT LCD display - high density, high contrast
• User Definable Axis Legends
• Solid Cast Construction
• Long Life Membrane Keypad
• Safe, Low Voltage Power Supply (UL)
• Panel Mount Version Available

DP1200 Features Include:

• Real-Time Tool Path Graphics
• Auto-Zoom
• Feed Rate Display
• Bolt Hole Circle Routine
• Line Hole Routine
• Arc Contouring
• Programmable Memory/Teach
• Polar Coordinate Readings
• Tool Offsets
• Taper Calculations
• Axis Vectoring/Summing
• Linear and Segmented Error Comp.
• Skew
• RS232 Output
• Languages: English, French, German, Spanish, Italian, Turkish, Czech, Russian, Portugues, Danish

Documentation

Product Manual

The DP700 is the latest in Newall's line of powerful and intuitive DROs. The DP700 was designed for all types of machining applications such as milling, turning, boring and grinding. The DP700 digital readout is a powerful yet intuitive DRO that includes a host of standard features that are normally found on more expensive units.

The DP700 digital readout sets the new standard for performance, value, and ease of use. Milling, grinding and turning packages are available. Available in 1, 2 and 3 axes.

• Available in 1, 2 or 3 axes
• Clean, Crisp, Easy to Read, LEDs
• Intuitive Message Window
• Long Life Membrane Keypad
• Solid cast construction
• Safe, Low Voltage Power Supply (UL)
• Panel Mount Version Available

DP700 Features Include:

• Feed Rate Display
• Bolt Hole Circle Routine
• Line Hole Routine
• Arc Contouring
• Programmable Memory/Teach
• Polar Coordinates
• Tool Offsets
• Taper Calculations
• Axis Vectoring/Summing
• Linear and Segmented Error Comp.
• Undo
• RS232 Output
• Languages: English, French, German, Spanish, Italian, Turkish, Czech, Russian, Portugues, Danish

Documentation

Product Manual

The most cost-effective, entry-level digital readout system that incorporates display technology, the DRO100 offers features and versatile software. Designed and manufactured in the USA, ACU-RITE readouts are the first choice for machine tool builders and users alike.

Specifications

Application: Milling, turning, grinding, boring and general purpose

Axes: Up to 3

Encoder inputs: TTL

Display step: 

• Adjustable, max. 7 digits
• Linear axis: 1 mm to 0.0001 mm
• Angular axis: 1° to 0.001° (00° 00′ 01”)

Display:

• 1 Axis (DRO101), 2 Axes (DRO102) or 3 Axes (DRO103)
• 7-inch color widescreen (15:9)
• Resolution 800 x 480 pixels for Position Values, Dialog Messages, Input and Graphic Functions

Status display:

• mm/inch
• abs/inc
• feed rate display

Functions: 

• Feed Rate Display
• Multiple Language Support
• Absolute/Incremental
• Help Function
• Zero Reset
• Instant Inch/mm Conversion
• Instant Radius/Diameter Conversion
• Axis error: Linear 1 segment
• Position-Trac™ Home Reference System

Data interface: USB 2.0 type C

• For Output of Parameters to a USB Stick or PC
• For Input of Parameters, Remote Control of Keys and Commands

Electrical Requirements: AC 100 V to 240 V (±10 %), 50 Hz to 60 Hz (±5 %), ≤ 33 W

Operating temperature: 0° to 45º C (32º to 113º F)

Protection EN60529: IP 40, front panel IP 54

Weight: 1.5 kg

Documentation 

Product Manual

Product Brochure

The most popular digital readout system in the machine tool marketplace, the DRO203 incorporates 7-inch color display technology with versatile software. Designed and manufactured in the USA, ACU-RITE readouts are the first choice of machine tool builders and users alike.

Milling Specific Features

• Bolthole pattern calculations with graphics (full and partial circles/linear patterns)
• Centerline calculation enables you to establish workpiece zero and midpoints
• Edge finder input
• I/O (option)

Turning Specific Features

• Lock axis feature
• Instant radius/diameter conversion
• Taper Calculator
• CSS (option)

Specifications

Application: Milling, turning, grinding, boring and general purpose

Axes: 2 or 3 from A to Z and Z₀

Encoder inputs: TTL

Display step: 

• Adjustable, max. 7 digits
• Linear axis: 1 mm to 0.0001 mm
• Angular axis: 1° to 0.001° (00° 00′ 01”)

Display:

• 3 Axes
• 7-inch color widescreen (15:9)
• Resolution 800 x 480 pixels for Position Values, Dialog Messages, Input and Graphic Functions

Status display:

• Tool
• Reference point
• Operating function
• Feed rate
• ABS/INC
• mm/inch
• stopwatch

Axis display: Standard

Common Functions:

• Job Clock / Stop Watch
• Feed Rate Display
• Multiple Language Support
• Absolute/Incremental
• Near-Zero Warning with Graphics
• Help Function
• 16 Tool Offsets/Diameter
• Preset and Zero Reset
• 4 Function Calculator/Trig Calculator
• Instant Inch/mm Conversion
• Position-Trac™ Home Reference System
• Linear/Non-Linear Compensation up to ±9,999 ppm

Turning Specific Functions:

• Taper calculator
• Radius/diameter switching
• Freezing the tool position for back-off
• Vectoring: X/Y display of the traverse path with inclined top slide

Milling Specific Functions:

• Bolt-hole Pattern Calculations with Graphics (full and partial circles/linear patterns)
• Centerline Calculation establish workpiece zero and midpoints

Cycles: Oblique line, circular arcs; only for milling, drilling, boring: circular and linear hole patterns

Error compensation:

• Axis error: Linear and nonlinear over up to 200 points
• Backlash compensation: for compensation of reversal error

Data interface: USB 2.0 type C

• For Output of Parameters to a USB Stick or PC
• For Input of Parameters, Remote Control of Keys and Commands

Switching I/O:

• Input for Edge Finder (with switching signal or contact triggering)
• Further input/outputs over the IOB 49 external input/output unit

Options:

• Single-Position Tilting Base
• Multiposition Holder
• Mounting Frame
• Protective Cover

Electrical Requirements:  AC 100 V to 240 V (±10 %), 50 Hz to 60 Hz (±5 %), ≤ 33 W

Operating temperature:  0° to 45º C (32º to 113º F)

Protection EN60529:  IP 40 (IP 54 front panel)

Weight: ~1.9 kg

Documentation

Product Manual

Product Brochure

The most complete digital readout system in the machine tool marketplace, the DRO300 has full part program capability, 99 tool offsets and multiple DRO displays along with standard input/output capability and edgefinder probe support all on an easy to read 7-inch color display. Designed and manufactured in the USA, ACU-RITE readouts are the first choice for machine tool builders and users alike.

Milling Specific Features

• Bolt hole pattern calculations with graphics (full and partial circles/linear patterns)
• Centerline calculation enables you to establish work piece zero and midpoints
• Edge finder/touch probe input
• I/O (option)

Turning Specific Features

• Lock axis feature
• Instant radius/diameter conversion
• Taper Calculator
• CSS (option)

Specifications

Application: Milling, turning, grinding, boring and general purpose

Axes: 2, 3, and 4 from A to Z and Z₀

Encoder inputs: TTL

Display step:

• Adjustable, max. 7 digits
• Linear axis: 1 mm to 0.0001 mm
• Angular axis: 1° to 0.001° (00° 00′ 01”)

Display:

• 3 Axes (DRO303) or 4 Axes (DRO404)
• 7-inch color widescreen (15:9)
• Resolution 800 x 480 pixels for Position Values, Dialog Messages, Input and Graphic Functions

Status display:

• Tool
• Reference point
• Operating function
• Feed rate
• ABS/INC
• mm/inch
• Stopwatch

Axis display: Standard

Common Functions:

• Multiple Display Views – DRO1, DRO2 & DRO3
• Program Storage
• Advanced Skew Compensation
• Job Clock / Stop Watch
• Feed Rate Display
• Multiple Language Support
• Absolute/Incremental
• Near-Zero Warning with Graphics
• Help function
• 99 Tool Offsets/Diameter
• Preset and Zero Reset
• 4 Function Calculator/Trig Calculator
• Instant Inch/mm Conversion
• Position-Trac™ Home Reference System
• Linear/non-linear compensation up to ±9,999 ppm

Turning Specific Functions:

• Lock Axis Feature establish tool offsets with the tool under load, resulting in reduced tool deflection
• Instant radius / diameter conversion
• Taper calculator, Vectoring
• INCLUDES Thread Assist simplify cutting metric threads on lathes with English leadscrews

Milling Specific Functions:

• Bolt-hole Pattern Calculations with Graphics (full and partial circles/linear patterns)
• Centerline Calculation establish workpiece zero and midpoints
• Edge finder/touch probe input

Cycles: Oblique line, circular arcs; only for milling, drilling, boring: circular and linear hole patterns

Error compensation: 

• Axis error: Linear and nonlinear over up to 200 points
• Backlash compensation: for compensation of reversal error

Data interface:  USB 2.0 type C

• For Output of Parameters to a USB Stick or PC
• For Input of Parameters, Remote Control of Keys and Commands

Switching I/O:

• Input for Edge Finder (with switching signal or contact triggering)
• Further input/outputs over the IOB 49 external input/output unit

Options:

• CSS (Constant surface speed), I/O (Input/Output)
• Multiple Scale Coupling Box
• Electronic Edgefinder
• Single-Position Tilting Base, Multiposition Holder, Mounting Frame, Protective Cover
• IB2X (allows input of 2 additional axis)

Electrical Requirements: AC 100 V to 240 V (±10 %), 50 Hz to 60 Hz (±5 %), ≤ 33 W

Operating temperature: 0° to 45º C (32º to 113º F)

Protection EN60529:  IP 40 (IP 54 front panel)

Weight: ~1.9 kg

Documentation

Product Manual

Product Brochure

High-performance counter for Mille and Lathe applications.

Features

• Counter for Milling machine and Lathe
• Display Resolution Switching
• Machine error compensation
• Data Storage
• Reset/Preset
• Detecting Reference Point of Measurement Unit
• Program function
• Multi datum point
• Milling function (Bolt hole circle / Easy R cutting / Line hole)
• Lathe function (Tool coordinating / Adding function)

Specifications

Models:

• LH70-1 (1 Axis)
• LH70-2 (2 Axis)
• LH70-3 (3 Axis)

Display: 7 digits and minus display

Connectable measuring unit: GB-ER, PL20C, SJ700A (Direct) / DG-B (Necessary to use the conversion adaptor which is sold separately)

Measuring unit input resolution (Standard): 0.1 μm, 0.5 μm, 1 μm, 5 μm, 10 μm, 1s, 10s, 1 min, 10 min

Measuring unit input resolution (Expanded): 100 μm, 50 μm, 25 μm, 20 μm, 2 μm, 0.05 μm, 1 degree can be added

Display resolution: Measuring unit input resolution or higher and diameter display (except for angle display)

Input signal: A/B quadrature, Z phase (Conforms to EIA-422)

Minimum input phase difference: 100 ns

Quantization error: ±1 count

AlarmDisplay: Measuring unit disconnected, Excess speed, Maximum display amount exceeded, Power failure, Error in stored data

Reset: Resettable by key switch

Preset: It is possible to store/call 3 kinds of numbers.

Reference point detection: The reference point of the measuring unit can be detected

Data storage: The value displayed before the power was turned off and setting values are stored

Linear compensation: A fixed compensation is applied to the measuring unit's count value. Compensation amount Standard: ±600 um/m (Expanded: ±1000 um/m)

Program: Machining coordinates can be programmed (number of program steps: 850 max.)

1. Manual programming by key switch
2. Automatic programming by playback
3. Mirror image during program execution
4. A canned cycle (bolt hole)

Sleep: The display is turned off when no operations are made for a preset time. (The time can be set.)

Power supply: DC 12 V Rating 0.75 A Max. 1 A AC 100 V to 240 V ±10 % When using the AC adaptor PSC-22 (For U.S. only) or PSC-23 (For Europe and other countries) *Option

Power consumption: max.32 VA (connected at the AC adaptor)

Operating Temperature: 0 ～ 40°C (non condensing)

Storage temperature: －20 ～ 60°C (non condensing)

Mass: Approx. 1.5 kg

Documentation

Product Manual

Product Catalog