For typical applications on manual machine tools such as milling machines or lathes, display steps of 10 µm or 5 µm are sufficient.

Specifications

Measuring standard: Glass scale with DIADUR graduation

Accuracy grade: ± 10 µm

Measuring length (ML): 70, 120, 170, 220, 270, 320, 370, 420, 470, 520, 570, 620, 670, 720, 770, 820, 870, 920, 970, 1020, 1140, 1240

Incremental signals: 1 VPP

Grating period: 20 µm

Reference mark: Distance-coded

Recommended measuring step (for position measurement): 10 µm, 5 µm

Power supply: 5 V DC ± 5 %/< 100 mA (without load)

Electrical connection: Separate adapter cable connectable to mounting block

Cable length: ≤ 30 m (with HEIDENHAIN cable)

Traversing speed: ≤ 60 m/min

Required moving force: ≤ 5 N

Vibration 55 Hz to 2 000 Hz: ≤ 150 m/s2 (EN 60 068-2-6)

Shock 6 ms: ≤ 300 m/s2 (EN 60 068-2-27)

Operating temperature: 0 °C to 50 °C

Protection EN 60 529: IP 53 when mounted according to the instructions

Weight: 0.27 kg + 0.67 kg/m ML

Documentation

Product Brochure

For typical applications on manual machine tools such as milling machines or lathes, display steps of 10 µm or 5 µm are sufficient.

Specifications

Measuring standard: Glass scale with DIADUR graduation

Accuracy grade: ± 10 µm

Measuring length (ML): 70, 120, 170, 220, 270, 320, 370, 420, 470, 520, 570, 620, 670, 720, 770, 820, 870, 920, 970, 1020, 1140, 1240

Incremental signals: TTL

Grating period: 20 µm

Edge separation a: ≤ 5 µs

Reference mark: Distance-coded

Recommended measuring step (for position measurement): 10 µm, 5 µm

Power supply: 5 V DC ± 5 %/< 100 mA (without load)

Electrical connection: Separate adapter cable connectable to mounting block

Cable length: ≤ 30 m (with HEIDENHAIN cable)

Traversing speed: ≤ 60 m/min

Required moving force: ≤ 5 N

Vibration 55 Hz to 2 000 Hz: ≤ 150 m/s2 (EN 60 068-2-6)

Shock 6 ms: ≤ 300 m/s2 (EN 60 068-2-27)

Operating temperature: 0 °C to 50 °C

Protection EN 60 529: IP 53 when mounted according to the instructions

Weight: 0.27 kg + 0.67 kg/m ML

Documentation

Product Brochure

For typical applications on manual machine tools such as milling machines or lathes, display steps of 10 µm or 5 µm are sufficient.

Specifications

Measuring standard: Glass scale with DIADUR graduation

Accuracy grade: ± 10 µm

Measuring length (ML): 170, 220, 270, 320, 370, 420, 470, 520, 570, 620, 670, 720, 770, 820, 870, 920, 970, 1020, 1140, 1240, 1340, 1440, 1540, 1640, 1740, 1840, 2040, 2240, 2440, 2640, 2840, 3040

Incremental signals: 1 VPP

Grating period: 20 µm

Reference mark: Distance-coded

Recommended measuring step (for position measurement): 10 µm, 5 µm

Power supply: 5 V DC ± 5 %/< 100 mA (without load)

Electrical connection: Separate adapter cable connectable to mounting block

Cable length: ≤ 30 m (with HEIDENHAIN cable)

Traversing speed: ≤ 60 m/min

Required moving force: ≤ 5 N

Vibration 55 Hz to 2 000 Hz: ≤ 150 m/s2 (EN 60 068-2-6)

Shock 6 ms: ≤ 300 m/s2 (EN 60 068-2-27)

Operating temperature: 0 °C to 50 °C

Protection EN 60 529: IP 53 when mounted according to the instructions

Weight: 0.7 kg + 2 kg/m ML

Documentation

Product Brochure

For typical applications on manual machine tools such as milling machines or lathes, display steps of 10 µm or 5 µm are sufficient.

Specifications

Measuring standard: Glass scale with DIADUR graduation

Accuracy grade: ± 10 µm

Measuring length (ML): 170, 220, 270, 320, 370, 420, 470, 520, 570, 620, 670, 720, 770, 820, 870, 920, 970, 1020, 1140, 1240, 1340, 1440, 1540, 1640, 1740, 1840, 2040, 2240, 2440, 2640, 2840, 3040

Incremental signals: TTL

Grating period: 20 µm

Edge separation a: ≤ 5 µs

Reference mark: Distance-coded

Recommended measuring step (for position measurement): 10 µm, 5 µm

Power supply: 5 V DC ± 5 %/< 100 mA (without load)

Electrical connection: Separate adapter cable connectable to mounting block

Cable length: ≤ 30 m (with HEIDENHAIN cable)

Traversing speed: ≤ 60 m/min

Required moving force: ≤ 5 N

Vibration 55 Hz to 2 000 Hz: ≤ 150 m/s2 (EN 60 068-2-6)

Shock 6 ms: ≤ 300 m/s2 (EN 60 068-2-27)

Operating temperature: 0 °C to 50 °C

Protection EN 60 529: IP 53 when mounted according to the instructions

Weight: 0.7 kg + 2 kg/m ML

Documentation

Product Brochure

Length gauges from HEIDENHAIN offer high accuracy over the entire measuring range, are mechanically rugged, and can be used in a great variety of applications.

They have a wide range of applications in production metrology, in multipoint inspection stations, measuring equipment monitoring, and as position measuring devices.

Specifications

High accuracy: ± 0.2 µm system accuracy

High repeatability: Repeatability typically < 0.03 µm with 12 mm measuring range

Zerodur scale:

• Close to 0 ppm/K scale expansion between 0 °C and 50 °C
• Provides the true measured value

Actuation by cable-type lifter:

• Defined velocity of the plunger
• No counting errors

Ball-bearing guide:

• Ball-bearing guide with low friction
• High-precision measuring loop

Measuring range: 12 or 25 mm

System accuracy: ± 0.2 µm

Repeatability:

• MT 1200: < 0.03 µm
• MT 2500: < 0.09 µm

Short-range accuracy:

• MT 1200: < 0.03 µm
• MT 2500: < 0.04 µm

Plunger actuation: By measured object, cable-type lifter or pneumatic

Interface: 1 V_PP, TTL

Documentation

Product Brochure

Length gauges from HEIDENHAIN offer high accuracy over the entire measuring range, are mechanically rugged, and can be used in a great variety of applications.

They have a wide range of applications in production metrology, in multipoint inspection stations, measuring equipment monitoring, and as position measuring devices.

Specifications

High accuracy: ± 0.5 µm system accuracy

High repeatability: Repeatability typically < 0.04 µm with 100 mm measuring range

Large measuring ranges: Measuring ranges of 60 mm and 100 mm

Ball-bearing guide:

• Ball-bearing guide with low friction
• High-precision measuring loop

Measuring range: 60 or 100 mm

System accuracy: ± 0.5 µm

Repeatability:

• MT 60: < 0.06 µm
• MT 101: < 0.04 µm

Plunger actuation: By motor or coupling

Interface: 11 µAPP

Documentation

Product Brochure

Rotary encoders from HEIDENHAIN have their own bearings and are sealed. They are robust and compact. These encoders are coupled by the rotor to the measured shaft through a separate coupling that compensates axial motion and misalignment between the encoder shaft and measured shaft.

Specifications

Interface: TTL

Line counts: 50, 100, 150, 200, 250, 360, 500, 512, 720, 1000, 1024, 1250, 1500, 1800, 2000, 2048, 2500, 3600, 4096, 5000, 6000, 8192, 9000, 10000

Reference mark: One

Scanning frequency: ≤ 300 kHz/≤ 150 kHz

Edge separation a: ≥ 0.39 µs/≥ 0.25 µs

System accuracy: 1/20 of grating period

Electrical connection:

• Flange socket M23, radial and axial
• Cable 1 m/5 m, with or without M23 coupling

Voltage supply: DC 5 V ±0.5 V

Current consumption without load: ≤ 120 mA

Shaft: Solid shaft 6 mm

Mech. permiss. speed n: ≤ 16000 rpm

Starting torque: ≤ 0.01 Nm (at 20 °C)

Moment of inertia of rotor: ≤ 2.7 x 10^-6 kgm^2

Shaft load: Axial: ≤ 40 N; radial: ≤ 60 N at shaft end

Vibration 55 Hz to 2000 Hz: ≤ 300 m/s2 (EN 60068-2-6)

Shock 6 ms: ≤ 2000 m/s2 (EN 60 068-2-27)

Max. operating temp: 100 °C

Min. operating temp: Flange socket or fixed cable: –40 °C; moving cable: –10 °C

Protection EN 60 529: IP67 at housing, IP64 at shaft inlet (IP66 upon request)

Weight: 0.3 kg

Documentation

Product Brochure

Rotary encoders from HEIDENHAIN have their own bearings and are sealed. They are robust and compact. These encoders are coupled by the rotor to the measured shaft through a separate coupling that compensates axial motion and misalignment between the encoder shaft and measured shaft.

Specifications

Interface: TTL

Line counts: 50, 100, 150, 200, 250, 360, 500, 512, 720, 1000, 1024, 1250, 1500, 1800, 2000, 2048, 2500, 3600, 4096, 5000, 6000, 8192, 9000, 10000

Reference mark: One

Scanning frequency: ≤ 300 kHz/≤ 150 kHz

Edge separation a: ≥ 0.39 µs/≥ 0.25 µs

System accuracy: 1/20 of grating period

Electrical connection:

• Flange socket M23, radial and axial
• Cable 1 m/5 m, with or without M23 coupling

Voltage supply: DC 10 V to 30 V

Current consumption without load: ≤ 100 mA

Shaft: Solid shaft 6 mm

Mech. permiss. speed n: ≤ 16000 rpm

Starting torque: ≤ 0.01 Nm (at 20 °C)

Moment of inertia of rotor: ≤ 2.7 x 10^-6 kgm^2

Shaft load: Axial: ≤ 40 N; radial: ≤ 60 N at shaft end

Vibration 55 Hz to 2000 Hz: ≤ 300 m/s2 (EN 60068-2-6)

Shock 6 ms: ≤ 2000 m/s2 (EN 60 068-2-27)

Max. operating temp: 70 °C

Min. operating temp: Flange socket or fixed cable: –40 °C; moving cable: –10 °C

Protection EN 60 529: IP67 at housing, IP64 at shaft inlet (IP66 upon request)

Weight: 0.3 kg

Documentation

Product Brochure

Rotary encoders from HEIDENHAIN have their own bearings and are sealed. They are robust and compact. These encoders are coupled by the rotor to the measured shaft through a separate coupling that compensates axial motion and misalignment between the encoder shaft and measured shaft.

Specifications

Interface: HTL

Line counts: 50, 100, 150, 200, 250, 360, 500, 512, 720, 1000, 1024, 1250, 1500, 1800, 2000, 2048, 2500, 3600, 4096, 5000

Reference mark: One

Scanning frequency: ≤ 300 kHz/≤ 150 kHz

Edge separation a: ≥ 0.39 µs/≥ 0.25 µs

System accuracy: 1/20 of grating period

Electrical connection:

• Flange socket M23, radial and axial
• Cable 1 m/5 m, with or without M23 coupling

Voltage supply: DC 10 V to 30 V

Current consumption without load: ≤ 150 mA

Shaft: Solid shaft 6 mm

Mech. permiss. speed n: ≤ 16000 rpm

Starting torque: ≤ 0.01 Nm (at 20 °C)

Moment of inertia of rotor: ≤ 2.7 x 10^-6 kgm^2

Shaft load: Axial: ≤ 40 N; radial: ≤ 60 N at shaft end

Vibration 55 Hz to 2000 Hz: ≤ 300 m/s2 (EN 60068-2-6)

Shock 6 ms: ≤ 2000 m/s2 (EN 60 068-2-27)

Max. operating temp: 100 °C

Min. operating temp: Flange socket or fixed cable: –40 °C; moving cable: –10 °C

Protection EN 60 529: IP67 at housing, IP64 at shaft inlet (IP66 upon request)

Weight: 0.3 kg

Documentation

Product Brochure

Rotary encoders from HEIDENHAIN have their own bearings and are sealed. They are robust and compact. These encoders are coupled by the rotor to the measured shaft through a separate coupling that compensates axial motion and misalignment between the encoder shaft and measured shaft.

Specifications

Interface: 1 VPP

Line counts: 1000, 1024, 1250, 1500, 1800, 2000, 2048, 2500, 3600, 4096, 5000

Reference mark: One

Cutoff frequency –3 dB: ≥ 180 kHz 

System accuracy: 1/20 of grating period

Electrical connection:

• Flange socket M23, radial and axial
• Cable 1 m/5 m, with or without M23 coupling

Voltage supply: DC 5 V ±0.5 V

Current consumption without load: ≤ 120 mA

Shaft: Solid shaft 6 mm

Mech. permiss. speed n: ≤ 16000 rpm

Starting torque: ≤ 0.01 Nm (at 20 °C)

Moment of inertia of rotor: ≤ 2.7 x 10^-6 kgm^2

Shaft load: Axial: ≤ 40 N; radial: ≤ 60 N at shaft end

Vibration 55 Hz to 2000 Hz: ≤ 300 m/s2 (EN 60068-2-6)

Shock 6 ms: ≤ 2000 m/s2 (EN 60 068-2-27)

Max. operating temp: 100 °C

Min. operating temp: Flange socket or fixed cable: –40 °C; moving cable: –10 °C

Protection EN 60 529: IP67 at housing, IP64 at shaft inlet (IP66 upon request)

Weight: 0.3 kg

Documentation

Product Brochure