High-performance counter for Mille and Lathe applications.
Features
- Counter for Milling machine and Lathe
- Display Resolution Switching
- Machine error compensation
- Data Storage
- Reset/Preset
- Detecting Reference Point of Measurement Unit
- Program function
- Multi datum point
- Milling function (Bolt hole circle / Easy R cutting / Line hole)
- Lathe function (Tool coordinating / Adding function)
Specifications
Models:
- LH70-1 (1 Axis)
- LH70-2 (2 Axis)
- LH70-3 (3 Axis)
Display: 7 digits and minus display
Connectable measuring unit: GB-ER, PL20C, SJ700A (Direct) / DG-B (Necessary to use the conversion adaptor which is sold separately)
Measuring unit input resolution (Standard): 0.1 μm, 0.5 μm, 1 μm, 5 μm, 10 μm, 1s, 10s, 1 min, 10 min
Measuring unit input resolution (Expanded): 100 μm, 50 μm, 25 μm, 20 μm, 2 μm, 0.05 μm, 1 degree can be added
Display resolution: Measuring unit input resolution or higher and diameter display (except for angle display)
Input signal: A/B quadrature, Z phase (Conforms to EIA-422)
Minimum input phase difference: 100 ns
Quantization error: ±1 count
AlarmDisplay: Measuring unit disconnected, Excess speed, Maximum display amount exceeded, Power failure, Error in stored data
Reset: Resettable by key switch
Preset: It is possible to store/call 3 kinds of numbers.
Reference point detection: The reference point of the measuring unit can be detected
Data storage: The value displayed before the power was turned off and setting values are stored
Linear compensation: A fixed compensation is applied to the measuring unit's count value. Compensation amount Standard: ±600 um/m (Expanded: ±1000 um/m)
Program: Machining coordinates can be programmed (number of program steps: 850 max.)
- Manual programming by key switch
- Automatic programming by playback
- Mirror image during program execution
- A canned cycle (bolt hole)
Sleep: The display is turned off when no operations are made for a preset time. (The time can be set.)
Power supply: DC 12 V Rating 0.75 A Max. 1 A AC 100 V to 240 V ±10 % When using the AC adaptor PSC-22 (For U.S. only) or PSC-23 (For Europe and other countries) *Option
Power consumption: max.32 VA (connected at the AC adaptor)
Operating Temperature: 0 ～ 40°C (non condensing)
Storage temperature: －20 ～ 60°C (non condensing)
Mass: Approx. 1.5 kg
Documentation
Product Manual
Product Catalog
